PLASTICHARGE ADDITIVE

Instructions:

Discharge-dyed cotton garments. Terry-cloth towels. Stencils: Use only water-resistant emulsion. Mixing Instuctions: Combine equal parts Plasticharge Additive and a suitable Union plastisol. Stir slowly until completely mixed. Mix only enough for a few days production. Add 4-6% ZFS Discharge Agent (DSPP-9ZFS) just before printing and mix until completely dissolved. After adding the ZFS the ink must be used for discharging within 24 hours.

Recommendation:

Caution: The printer must test any color mixed with Plasticharge Additive on the garment prior to production to determine if the dyes in that garment will discharge. It is recommended that Plasticharge Additive not be mixed with ink colors made from non-permanent type red pigments as oxidation may result in extreme color shifts.

Statement:

Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Union Ink
Product Code: DSPCHE907
Industry: Inks
Application: Screen Printing
Category: Modifier/Additives
Sub Category: Base
Chemistry: Plastisol/Water
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001

Performance:

After Flash Tack: Decreases with increased mesh

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Mesh: 156-178 (62-71 metric)

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)