PREPRINT DISCHARGE CLR

Instructions:

Under base for plastisol or water based prints on dischargeable fabrics. Discharges color from dischargeable 100% cotton fabric. White can be used as under base or stand-alone white.
Stencils: Use any direct emulsion which is listed as water base / discharge resistant on all screens within job. Check with emulsion manufacturer for specifi cations and proper usage.
Additives: DSPP-9ZFS must be added at specifi ed amounts for the effect to take place. ATEX-9600 Aqueous Stay Open may be added at 0.5-1% by weight to slow down ink drying into mesh. Small amounts of water may be added to increase inks penetration into fabric.
Mixing Instructions for DSPP-9ZFS Discharge Agent: The discharge system consists of two parts: the ink and the Discharge Agent. The DSPP-9ZFS Discharge Agent is supplied as a powder and sold separately. Add 6-8% DSPP-9ZFS Discharge Agent of the total weight to the Soft Hand Clear, Soft-Hand White or the custom color created utilizing the DSPP-9070 Discharge Base and Union's PIGT-Series Pigments). Mix until totally dissolved. Minimize waste by only mixing enough of the ink / discharge agent that will be used in a 6-8 hour period.
Printing Instructions: Print the Soft-Hand Discharge inks first, forcing the ink well into the fabric with moderate squeegee pressure, Open mesh / graphic should be fl ooded immediately after printing to avoid ink drying into screen. If utilizing DSPP-9050 Soft-Hand Clear other plastisol or water based colors may be printed without fl ash curing. The color values of the over-printed inks will appear after curing. You may mist the screen occasionally with water to maintain the ink viscosity during long printing runs. Print custom dischargeable in the same manner. Wash-Up: Clean the screens and squeegees with warm water and if necessary, mild detergent to remove dried ink from mesh.
Products: Available Standard Colors / DSPP-1003 Bright Discharge White / DSPP-9070 Discharge Base/ DSPP-9050 Soft-Hand Clear/ Additives DSPP-9ZFS Discharge Agent / ATEX-9600 Aqueous Stay Open.

Recommendation:

Caution: Not all garments are dyed with dischargeable dyes. The printer must test Soft-Hand Discharge inks on the garment before using in production to determine if the dyes in that garment will discharge

Statement:

Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Union Ink
Product Code: DSPP9050
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Chemistry: Waterbase
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001

Performance:

After Flash Tack: Decreases with increased mesh

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Mesh: 156-186 thread per inch (62-73 threads per cm)

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)