For mixing accurate and intense colors. For wet-on-wet direct printing on white, light colored fabrics or under base whites. Stencils: Use any direct emulsion or capillary film compatible with plastisol inks. Additives: Unimatch inks are supplied ready to mix. Since plastisol inks _ã–body up_㝠as they sit in the container you should always stir them well to determine the actual viscosity before adding any reducer. Reducing the ink also reduces the opacity. If you wish to reduce the inks viscosity, use Viscosity Reducer (PLRE-9000). To extend the ink or to soften the hand further use only Unimatch Soft Hand Extender Base (PTHF-9070). Color Mixing Instructions: Formulas and instructions for simulating the standard PANTONE°Î _ã–C_㝠colors are available from Union Ink on our web page www.unionink.com. Register to use our newly updated On-Line-Mixing Calculator. Curing Instructions: Unimatch inks will fully cure and withstand repeated washings when the entire thickness of the ink deposit reaches 300° F (149° C). Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks. PRODUCTS: Standard Colors PTHF-1000 White / PTHF-3005 Red Y/S / PTHF-5004 Blue R/S PTHF-2000 Yellow / PTHF-4006 Violet / PTHF-6000 Green PTHF-2050 Orange / PTHF-4008 Cerise / PTHF-8000 Black PTHF-3000 Red B/S / PTHF-5000 Blue G/S Fluorescent Colors PTHF-F210 Neon Yellow / PTHF-F410 Neon Magenta PTHF-F310 Neon Red / PTHF-F510 Neon Blue Additives PLRE-9000 Reducer/Detackifi er / PTHF-9070 Soft Hand Extender


Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production.


Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Union Ink
Product Code: PTHF5000
Industry: Inks
Application: Screen Printing
Category: Mixing Inks
Chemistry: Plastisol
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001


Coverage: Medium Opacity
After Flash Tack: Decreases with increased mesh


Profile: Square
Type: Polyurethane
Angle: 10° - 20°


Mesh: 230


Storage Temperature: 65°F - 95°F (18°C - 35°C)