EF PRINCESS PINK GLITTER

Instructions:

Direct printing or transfer applications. Stencils: Use any direct emulsion or capillary film. Additives: Glitter Plastisol inks are supplied ready to print. Reducer/Detackifi er (PLRE-9000) may be added if a thinner consistency is required. Mixing: The availability of two Clear Glitter Bases, PAGE-9030 Standard Clear Base & PAGE-9032 Premium Clear Base. Make it possible for the user to make additional glitter colors by using other Heat Stable dry glitter fl akes available from Union Ink or your local distributor. For a _ã–Retro_㝠Glossy looking glitter use our PAGE-9030 and up to 1.5 - 2 lbs. of dry glitter fl ake per gallon. For more sparkle and a matte or dry look use our PAGE-9032 and up to 1.5 - 2 lbs. of dry glitter flake per gallon. Printing Instructions: As recommended, mesh counts higher than 40 (15 metric) should not be used as this will limit the inks ability to fl ow onto the garment and will result in a very spotty, irregular finish. Curing Instructions: These inks will cure at 300° F (149° C). Because of the refl ective nature of this ink, it requires a longer curing time and more heat to reach the required temperature than a standard plastisol. Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks. PRODUCTS: Available Colors PAGE-J100 Crystalina / PAGE-J120 Standard Silver / PAGE-J220 Standard Gold PAGE-S120 Super Silver / PAGE-J306 Princess Pink / PAGE-J321 Standard Red Available Bases PAGE-9030 Standard Clear Base / PAGE-9032 Premium Clear Base

Recommendation:

Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specifi c requirements prior to using in production.

Statement:

Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Union Ink
Product Code: PAGEJ306
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Sub Category: Glitter
Chemistry: Plastisol
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001

Performance:

Coverage: High Opacity
After Flash Tack: Decreases with increased mesh

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Mesh: 24-40 (10-15 metric)

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)