For direct printing on T-shirts or fleece.
Stencils: Use any direct emulsion or capillary film.
Additives: While standard Suede Plastisol inks are supplied ready to print, PLSE/NPSU-9101 Suede Additive can be added in increments up to 15% to Mixopake, Maxopake or Unimatch to achieve a suede effect. Pre-test prior to running production to ensure the desired effect is reached.
Curing Instructions: These inks will cure at 300F (149C). Care should be taken to properly cure as under cure or over cure can and will result in adverse effects.
Washability: Excellent. Do not dry clean or iron printed areas.


Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production.


Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Union Ink
Product Code: NPSU8000
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Sub Category: Suede
Chemistry: Plastisol
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001


After Flash Tack: Decreases with increased mesh


Profile: Square
Type: Polyurethane
Angle: 10° - 20°


Mesh: 110


Storage Temperature: 65°F - 95°F (18°C - 35°C)