EF METALLIC RICH GOLD

Instructions:

For light and medium colored shirts. Hot-split and cold-peel transfers. 100% Cotton fabrics only.
Stencils: Use any direct emulsion or capillary film compatible with plastisol inks.
Additives: If reducing the inks viscosity is necessary, add 3-5% Viscosity Reducer (PLRE-9000) by weight. Do not use any additives when using Ultrasoft for plastisol transfer production.
Curing Direct Prints: Ultrasoft inks will fully cure when the entire thickness of the ink deposit reaches 300° F (149° C). Metallic inks are not recommended for transfer application.
Curing Heat Transfers: Ultrasoft ink will semi-cure or gel when it reaches 240°- 250°F (115°-121°C).
Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.

Recommendation:

Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specifi c requirements before using in production.

Statement:

Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.

Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.

Product Overview:

Brand: Union Ink
Product Code: PLUEM222
Industry: Inks
Application: Screen Printing
Category: Specialty Inks
Sub Category: Metallic
Chemistry: Plastisol
Substrate(s): Cotton
Best Used By: 12 months
Certification(s): ISO9001

Performance:

Coverage: Medium Opacity
After Flash Tack: Decreases with increased mesh

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° - 20°

Screen:

Mesh: 86 or lower

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)