Light and medium-colored garments. Stencils: Use any water-resistant direct emulsion. Additives: Aerotex is supplied ready-for-use. If necessary, up to 10% SOLV-1679 or 2-5% Stay Open (ATEX-9600) can be added to control screen clogging. Additives will reduce opacity Curing Direct Prints: Catalyzed prints will set enough for stacking within minutes after printing and continue to cure at room temperature. Wash tests should not be done for 24 hours after printing. To speed up production, dry prints at approximately 250° F (121° C) for 2 minutes. Catalyst: ATEX-9120) must be added in a ratio of 1/2 oz. Catalyst to 1 quart of ink (1 to 64 by volume) for washfastness. For Aerotex Shimmer inks 2% by weight of ATEX-9120 catalyst is required for wash fastness. For extended open screen times 2-5% of ATEX-9600 may be added when necessary. Inks are supplied with the correct amount of catalyst. The ink/catalyst mixture has an average pot life of approximately 8 hours. Do not use the mixture after that period. The mixture may show signs of deterioration sooner, in which case it should be discarded. Wash-up: Clean up with water immediately after printing. Detergent (ATEX-9400), or a commercial detergent containing at least fi ve percent ammonia is recommended where ink may have dried in the screen. Follow by rinsing with lukewarm water. Standard Colors ATEX-1000 White / ATEX-1020 Super Opaque White / ATEX-2011 Lemon Yellow ATEX-2021 Chrome Yellow / ATEX-2051 Orange / ATEX-3004 Hot Pink ATEX-3006 Brite Red / ATEX-3030 Maroon / ATEX-4020 Royal Purple ATEX-3011 Scarlet Red / ATEX-5000 Peacock Blue Standard Colors Cont. ATEX-5004 Turquoise / ATEX-5020 Mono Blue / ATEX-5035 Royal Blue ATEX-5040 Navy Blue / ATEX-6030 Spring Green / ATEX-6081 Paris Green ATEX-7002 Khaki / ATEX-7021 Yellow Ochre / ATEX-7031 Sienna Brown ATEX-8000 Black Fluorescents ATEX-F211 Orbit Yellow / ATEX-F212 Golden Yellow / ATEX-F213 Inferno Orange ATEX-F214 Flame Orange / ATEX-F311 Missile Red / ATEX-F312 Aurora Pink ATEX-F511 Solar Blue / ATEX-F611 Traffi c Green Additives SOLV-1679 Retarder / ATEX-9030 Clear For Metallics / ATEX-9090 Extender Base ATEX-9120 Catalyst / ATEX-9400 Detergent / ATEX-9600 Aqueous Stay OpenRecommendation:
Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production. Aerotex inks must be kept from freezing. Aerotex catalyst contains minute amounts of hazardous material and may cause an allergic reaction in sensitive people. Use plastic gloves when handling.Statement:
Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.Disclaimer: Not all Union products are available in every country. Please check with your local representative for availability. The data presented in this leaflet are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this leaflet should be checked by preliminary trials because of conditions during processing over which we have no control. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the products for a particular purpose.