General Information

Hi Gloss Gel Clear (PLFX-9036) is a specially formulated clear for creating 3D and glossy, wet looks when printed directly on garments or overprinted on underbase colors. For best results either print on a underbase, or if printing directly upon a garment use a print/flash/print technique.

Mesh

For best results use mesh counts in the 60-73 range (24-28 metric).

Stencils

For best results apply capillary films in the 200-700 micron range using the same techniques as used in making stencils for high density printing.

Toners

Hi Gloss Gel Clear can be tinted with toners to the desired shade of color. However, adding toners could effect the glossiness of the finished product.

Additives

None recommended, use Hi Gloss Gel Clear directly from the container. Any reduction of this product by adding reducers or extenders will effect the intended look.
Curing Instructions

Hi Gloss Gel Clear will fully cure and withstand repeated washings when the entire ink deposit reaches 320° F (160° C). Because ink is tacky when hot, do not allow garments to fall into a box unattended at the end of the dryer.

Wash-Up

Clean the screens and squeegees with mineral spirits or any screen wash designed for plastisol inks.

Washability

Excellent. Do not dry clean. Do not iron printed areas.

Caution

Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production.